Rapid-Cool™ Precoolers

Precool and Recool™ in Pallet Racking, 2-High.

Now Accepting Orders for 2018! .

precoolersrWe use five 42-inch fans per 20-pallets, for 6,000 CFM per Pallet!

When floor space is limited, go “up” for more precooling capacity!

Our Rapid-Cool™ Precoolers, are the future of pre-cooling. If you move twice as much air across the product, you will cool twice as fast.  Period.  Fan / affinity laws, and the rules of thermodynamics are time-tested.

– A Rapid-Cool will accommodate pallet heights from 70″ high to 94″ high maximum.

– Five (5) fan motors, 42″ axial, with anti-cavitation props, Jim Still designed.

– Pallet racking is safety-orange powder coated, except drive-in rails and floor angles are hot-dipped galvanized steel.

– All Nema-4X washdown

– With Air pressure and temperature sensors.

– Nema-4x VFD, 100 HP rated, American-made.

– UL / CSA / CE.

– Just supply main power.

It is also possible to load from one end, and unload from the other, for FIFO, and to manage your precoolers from your SmartPhone, using our exclusive SmartCool™ control software .

Key to the ability to precool faster, is the vertical air delivery, allowing use of five axial fans per lot.  More airflow enables greater cooling capacity and flow, and faster pulldown times. Combine denser storage with faster cooling, and you can triple your throughput, in the same footprint, with high volume forced air cooling.

Our pre-coolers all have differing airflow volume (cfm) at design static pressure (inches of water column), depending upon the commodity, packaging, and other requirements.